Summary :

the parameter is incorrect

In this article, you lot volition find the reason to why the parameter is wrong equally well as the solutions to fix the incorrect parameter. In improver, this post will introduce how to recover data with MiniTool professional person software.

Quick Navigation :

  • Error - Cannot Copy File: The Parameter Is Incorrect
  • Error - Bulldoze Is Not Attainable. The Parameter Is Incorrect.
  • Data Recovery – Bulldoze Is Not Accessible. The Parameter Is Wrong.
  • How Do I Prepare The Parameter Is Incorrect
  • Lesser Line
  • Parameter Is Incorrect FAQ
  • User Comments

Last calendar week, I tried to admission my precious photos stored on my hard drive, only I failed and got a warning message that saying "D:\ is not accessible, the parameter is incorrect".

D is not accessible Parameter is incorrect

In this situation, what should I practice? How Do I gear up the "The parameter is incorrect" error without data loss?

Later seeing this error, I read lots of information and consulted many experts to attempt to solve the issue effectively. At present, in today'south post, I am going to testify you how to do this.

Mistake - Cannot Copy File: The Parameter Is Wrong

Equally we know, sometimes, we would like to transfer files from USB to computer or vice versa. Still, some users probably neglect to copy files, and they receive some fault messages like: "Fault Copying File or Folder. The parameter is incorrect" or "Cannot Re-create File: The parameter is incorrect". (Picture below)

Cannot Copy file

At this time, what should we practice?

Now, you can read this postal service How to Fix The Parameter Is Incorrect Copying Files Consequence in Windows 10 to know how to prepare parameter is incorrect fault with ease.

Note: Since this post introduces lots of information about this fault, here we don't need to spend much time talking as well much about information technology. Adjacent, we want to show another situation where we may encounter the parameter is wrong error.

Mistake - Drive Is Not Accessible. The Parameter Is Incorrect.

Here, let's start with a truthful example.

Hi guys,
I got an internal hard disk. I bought a SATA Difficult disk Enclosure in social club to use as external. The hard disk was detected simply when I am going to open the particular drive, it takes quite a while and prompts an mistake message "G:\ is not accessible. The parameter is incorrect / Information error (cyclic redundancy check)…" There is no "run as administrator" option when I right clicked it also. I tried running the chkdsk in administrator command prompt and this is the result I got.
is not accessibleThe parameter is incorrect Data error

Accept yous ever encountered the same state of affairs? Practice you know how to bargain with this fault without losing data stored on this bulldoze? If you even so don't know how to deal with this problem effectively, y'all tin go along reading to find solutions.

Data Recovery – Drive Is Non Accessible. The Parameter Is Wrong.

When encountering the error "bulldoze not accessible, the parameter is incorrect", experienced users volition firstly retrieve of recovering data and files from this drive, and then prepare this mistake.

Now, you might be wondering:

"How to effectively recover information from bulldoze whose parameter is incorrect?"

Well, MiniTool Ability Data Recovery, a piece of elementary and professional data recovery software developed by MiniTool Solution Ltd., is recommended hither, for this tool tin can easily and quickly recover information from inaccessible drive including RAW, corrupted, damaged or unallocated drive.

This tool supports Windows seven/viii/10 and other operating systems, and supports many storage devices including hard drive, external difficult drive, USB wink drive. Besides, information technology is a read–only tool, thus users tin utilize information technology to get lost data back without affecting the original data.

What'due south more, information technology not only offers wizard-based operation just besides provides simple interface. Therefore, fifty-fifty a new user can easily handle this tool to restore lost information.

Complimentary Download

Next, let's analyze the details. (Hither, we take Windows10 for case.)

Tutorial: 3 steps to recover lost data from incorrect parameter drive Windows 10.

Expect:

Step 1: launch MiniTool Power Information Recovery to go its chief interface.

You tin see This PC recovery module is selected by default, and all institute partitions besides equally their basic information including the book label, the type of file system, the capacity, so on.

this pc

Footstep 2: at present, you need to select the target device which is prompting "the parameter is incorrect", and so tap Scan push to browse it.

Note: While scanning, y'all can preview the institute files. If you take detect all needed files, you can stop the scanning procedure by clicking the Stop push button. Yet, for the best recovery result, information technology is recommended to wait until total browse finishes, as shown below.

stop scanning

Stride three: check all needed files, and so tap Save button which is located at the lower right corner to store them. Note: never shop selected files to the drive where yous lost your data.

save files

Right here, you lot tin direct click the following button to get the personal edition of MiniTool Power Data Recovery to pause the limitation.

I used MiniTool Power Data Recovery to effectively recover lost data from drive which prompts"…is non accessible. The parameter is wrong. Click to tweet

See!

With MiniTool Power Information Recovery, nosotros tin can hands and chop-chop recover data from inaccessible drive whose parameter is wrong without damaging the original information.

Tip: In general, in addition to the "the parameter is incorrect" mistake, other errors will also crusade hard drive not accessible. Hither, you might be interested in this postal service: How to Fix External Difficult Drive Not Recognized? Here Are half dozen Solutions.

After recovering information, allow'southward see how to ready the parameter is incorrect mistake.

How Do I Fix The Parameter Is Wrong

At present, before fixing the mistake "Drive is non accessible. The parameter is incorrect", I desire to introduce what acquired this to happen at first. Knowing the exact reason, we can solve the trouble with ease.

Cause of the error message "Drive is not accessible. The parameter is incorrect"

In general, diverse reasons tin can cause this mistake, including:

Pull out removable devices in an improper way: Some users including me may direct pull out our USB drive or other storage devices without ejecting. Force removal of drive may do harm to or fifty-fifty destroy boot records of partition, thus we cannot access its information and receive the "…parameter is incorrect" mistake.

USB port problem: The USB port is the bridge which connects the removable drive like USB flash bulldoze to computer, in one case it gets problem so the removable bulldoze may get damaged at the same fourth dimension. Thus, this bulldoze cannot be opened and reports some errors like "…is non accessible. The parameter is incorrect".

Bad sectors on the hard drive: As we all know, even one bad sector can brand unabridged hard drive inaccessible.

Power failure for powered difficult drive: Power failure likewise is one of the reasons which cause the hard drive inaccessible or unreadable.

Virus set on: Virus infection or malware assault can also crusade "the parameter is incorrect" fault.

File system goes wrong, such as DBR, MFT, FAT: In many cases, the mistake "Drive is not accessible. The parameter is incorrect" is acquired past file system corruption.

In calculating, a file organisation is used to control how data is stored and retrieved. Once file system goes wrong, you may fail to access drive and receive some errors similar "…the parameter is incorrect", "Data mistake (cyclic redundancy cheque)…", "Windows was unable to complete the format", etc.

Tip: Exercise you lot know what cyclic redundancy check error is? Want to know the hugger-mugger of how to effectively solve the "information mistake (cyclic redundancy check)" issue? Now, this postal service How to Fix Information Fault (Cyclic Redundancy Bank check)! Expect Here! will tell you something you desire to know.

Click to tweet

After knowing the reasons, let'due south talk almost how to ready the parameter is wrong.

2 Solutions - The Parameter Is Wrong

Solution 1: formatting the inaccessible bulldoze

According to a survey, we find many users who see the error "Drive is non attainable. The parameter is wrong" will attempt to format this drive to utilize it once more.

Warning: Formatting will destroy all original information on this drive. Thus, you had better turn to MiniTool Power Data Recovery to recover lost information earlier formatting.

Still, how to format this drive effectively?

When it comes to talking about difficult bulldoze formatting, we want to share another MiniTool'south excellent product, MiniTool Sectionalisation Magician, with you lot. Every bit long every bit you turn to the professional person freeware, you can easily format partition to set some file arrangement errors.

Starting time, launch MiniTool Segmentation Wizard, then select the division which needs formatting and cull Format Partition from the left panel or choose Format from toolbar, and enter new division characterization and choose desired file system and cluster size.

In full general, default cluster size is recommended for Partition Wizard will work out proper cluster size according to partition size.

format

Finally, click Apply to execute all changes.

As we know, if the error message "Bulldoze is not accessible. The parameter is wrong" is caused past corrupted file organisation, we can format this bulldoze to gear up it. However, what if the inaccessible drive is caused past bad sectors? In this situation, you can endeavor the following solution.

Solution two: run chkdsk f/r

If the "the parameter is incorrect" fault is caused past bad sectors, lost clusters, cantankerous-linked files, file system errors and directory fault, you can run chkdsk to fix information technology. Detailed steps are shown below.

Starting time, tap Startmenu, clickAll Programs and so chooseAccessories. After that, correct-click theCommand Promptand choose Run as administrator.

Note: If you are prompted for inbound administrator or for a confirmation, then type in the password, or click Allow. Here, you can read this post How to Open the Command Prompt in Windows to know more solutions to admission Command Prompt.

Then, type command line "chkdsk /f/r Ten:" (X is the drive letter of the inaccessible partition) and hit Enter key. Here, for instance, since my I bulldoze prompts "I:\ is non accessible. The parameter is incorrect", I type "chkdsk /f /r i:" equally shown below.

chkdsk

Finally, type go out and press Enter to get out it.

Tip: In some cases, the operation can't be completed under system, and you need to practise this in safe manner or PE surroundings.

Warning: If bad sectors are constitute on the drive during the process and chkdsk volition effort to repair them. In that case, data stored on the drive with bad sectors will be lost. Therefore, you had better recover lost information before running these commands. And, MiniTool Power Data Recovery is recommended here, for it has excellent functioning, high security and simple operation.

Click to tweet

Bottom Line

Later on seeing the above introduction, I hope yous at present have a basic understanding of how to deal with "bulldoze non accessible, the parameter is wrong" fault without damaging the original data stored on this drive. To be specific:

Commencement, turn to MiniTool Power Information Recovery to recover data from the inaccessible bulldoze.
Second, formatting this drive or running chkdsk to ready the "the parameter is incorrect" error.

After reading the whole page, if yous have any questions or any doubts most MiniTool Power Data Recovery, you can leave information technology in the following comments or straight send email to [email protected].

Parameter Is Incorrect FAQ

What are the causes of the parameter is incorrect?

  1. Pull out removable devices in an improper fashion
  2. USB port problem
  3. Bad sectors on the hard drive
  4. Power failure for powered hard bulldoze
  5. Virus assault
  6. File system goes wrong, such every bit DBR, MFT, FAT

How to fix the "parameter is incorrect" external hard drive issue?

  • Method ane. Run "chkdsk drive letter: /F" to repair your inaccessible external difficult drive:
  • Method 2. Type SFC /scannow in the CMD window to repair missing and corrupted system files.
  • Method three. Use antivirus software to scan external hard disk drive to quarantine the virus to fix parameter is an wrong error.
  • Method four. Format external difficult drive to fix the parameter is incorrect mistake.

What does the parameter is wrong mean?

The parameter is incorrect error prevents yous from opening the device and accessing your information. This error usually leads to ii major issues: cannot copy files and drive becomes inaccessible.

How to recover data from external difficult drive?

  1. Connect external hard drive to PC.
  2. Launch MiniTool Power Data Recovery, and select Hard disk drive.
  3. Browse the external difficult drive.
  4. Save all needed data.